LIBSOPHON User Guide

contents

• 1. Disclaimer
• 2. Release note
• 3. Install libsophon
• 4. Development using libsophon
  • 4.1. PCIE MODE
  • 4.2. SOC MODE
    • 4.2.1. Compiling program on the SOC board
    • 4.2.2. x86 cross-compiling programs
• 5. Use of libsophon tools
  • 5.1. Operation instructions for bm-smi
    • 5.1.1. Interpretation of terms
    • 5.1.2. Introduction of bm-smi
    • 5.1.3. Meanings of parameters
    • 5.1.4. Specific operation methods and parameters
    • 5.1.5. Introduction of text mode
    • 5.1.6. help information of bm-smi :
      • 5.1.6.1. help information of bm-smi under PCIe mode
      • 5.1.6.2. help information of bm-smi in SOC mode
    • 5.1.7. bm-smi used in SOC mode
  • 5.2. Operation instructions for proc file system
    • 5.2.1. Introduction of proc file system
    • 5.2.2. Meaning of parameters
    • 5.2.3. Meanings and Operation Methods of Parameters
      • 5.2.3.1. Detailed Information of Devices in PCIe Mode
      • 5.2.3.2. Detailed information of devices in SOC mode
  • 5.3. Operation Instructions for Tpu Drive Sysfs File System
    • 5.3.1. Introduction of TPU Drive Sysfs File System
    • 5.3.2. Meanings of Parameters
    • 5.3.3. Specific use method of TPU Drive Sysfs File System interface
• 6. Using test environment by Docker
  • 6.1. Build test environment on Docker
    • 6.1.1. Install Docker
    • 6.1.2. Make the Dockerfile and create the docker image
      • 6.1.2.1. Make the dockerfile
      • 6.1.2.2. Create the docker image
  • 6.2. Checkout the environment
• 7. Instruction of Out_of_band interface
  • 7.1. SMBUS protocol interface definition
    • 7.1.1. Commands
  • 7.2. The out-of-band interface of SC5 series
    • 7.2.1. Instruction
    • 7.2.2. SC5+ MCU protocol command
  • 7.3. The out-of-band interface of SC7 series
    • 7.3.1. Instruction
    • 7.3.2. SC7Pro MCU protocol command