bmcv_debug_savedata

该接口用于将bm_image对象输出至内部定义的二进制文件方便debug，二进制文件格式以及解析方式在示例代码中给出。

接口形式:

bm_status_t bmcv_debug_savedata(
        bm_image input,
        const char *name
);

参数说明:

• bm_image input

  输入参数。输入 bm_image。

• const char* name

  输入参数。保存的二进制文件路径以及文件名称。

返回值说明:

• BM_SUCCESS: 成功

• 其他:失败

注意事项:

1. 在调用 bmcv_debug_savedata()之前必须确保输入的 image 已被正确创建并保证is_attached，否则该函数将返回失败。

代码示例以及二进制文件解析方法:

bm_image input;
bm_image_create(handle,
    1080,
    1920,
    FORMAT_BGR_PLANAR,
    DATA_TYPE_EXT_1N_BYTE,
    &input);
bm_image_alloc_dev_mem(input);
// ... your own function
bmcv_debug_savedata(input, "input.bin");
// now a file named "input.bin" is generated in current folder

// the following code shows how to parse the binary file
FILE *   fp           = fopen("input.bin", "rb");
uint32_t data_offset  = 0;
uint32_t width        = 0;
uint32_t height       = 0;
uint32_t image_format = 0;
uint32_t data_type    = 0;
uint32_t plane_num    = 0;

uint32_t stride[4] = {0};
uint64_t size[4]         = {0};

fread(&data_offset, sizeof(uint32_t), 1, fp);
fread(&width, sizeof(uint32_t), 1, fp);
fread(&height, sizeof(uint32_t), 1, fp);
fread(&image_format, sizeof(uint32_t), 1, fp);
fread(&data_type, sizeof(uint32_t), 1, fp);
fread(&plane_num, sizeof(uint32_t), 1, fp);

fread(size, sizeof(size), 1, fp);
fread(stride, sizeof(stride), 1, fp);

uint32_t channel_stride[4] = {0};
uint32_t batch_stride[4]   = {0};
uint32_t meta_data_size[4] = {0};

uint32_t N[4] = {0};
uint32_t C[4] = {0};
uint32_t H[4] = {0};
uint32_t W[4] = {0};

fread(channel_stride, sizeof(channel_stride), 1, fp);
fread(batch_stride, sizeof(batch_stride), 1, fp);
fread(meta_data_size, sizeof(meta_data_size), 1, fp);

fread(N, sizeof(N), 1, fp);
fread(C, sizeof(C), 1, fp);
fread(H, sizeof(H), 1, fp);
fread(W, sizeof(W), 1, fp);

fseek(fp, data_offset, SEEK_SET);
std::vector<std::unique_ptr<unsigned char[]>> host_ptr;
host_ptr.resize(plane_num);
void* void_ptr[4] = {0};
for (uint32_t i = 0; i < plane_num; i++) {
    host_ptr[i] =
        std::unique_ptr<unsigned char[]>(new unsigned char[size[i]]);
    void_ptr[i] = host_ptr[i].get();
    fread(host_ptr[i].get(), 1, size[i], fp);
}
fclose(fp);
std::cout << "image width " << width << " image height " << height
        << " image format " << image_format << " data type " << data_type
        << " plane num " << plane_num << std::endl;
for (uint32_t i = 0; i < plane_num; i++) {
    std::cout << "plane" << i << " size " << size[i] << " C " << C[i]
            << " H " << H[i] << " W " << W[i] << " stride "
            << stride[i] << std::endl;
}
// The following shows how to recover the image
bm_image recover;
bm_image_create(handle,
                height,
                width,
                (bm_image_format_ext)image_format,
                (bm_image_data_format_ext)data_type,
                &recover,
                (int *)stride);
bm_image_copy_host_to_device(recover, (void **)&void_ptr);
bm_image_write_to_bmp(recover, "recover.bmp");
bm_image_destroy(recover);